AUIRS2336STR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 1.6W |
| Technology | CMOS |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Base Part Number | AUIRS2336S |
| Number of Outputs | 3 |
| Max Output Current | 350mA |
| Power Supplies | 15V |
| Power Dissipation | 1.6W |
| Output Current | 200mA |
| Propagation Delay | 750 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Fall Time (Typ) | 120 ns |
| Turn-Off Delay Time | 50 ns |
| Rise / Fall Time (Typ) | 125ns 50ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | 3-Phase |
| Number of Drivers | 6 |
| Turn On Time | 0.75 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 200mA 350mA |
| Logic Voltage - VIL, VIH | 0.8V 2.5V |
| Turn Off Time | 0.75 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 2.65mm |
| Length | 18.1mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AUIRS2336STR Overview
The 28-SOIC (0.295, 7.50mm Width) package provides greater flexibility.There is a package in the form of Tape & Reel (TR).Configuration is supported by 6 drivers.Surface Mount is mounted in the way.In the absence of a power supply voltage of 10V~20V V, it is able to demonstrate its superiority.Gate type IGBT, N-Channel, P-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Non-Inverting is used as its input type.There are 28 terminations to form the base of its configuration.Numerous related parts can be found under its base part number AUIRS2336S.The device is mounted using Surface Mount.As a result, it is configured with 28 pins when it is designed.A voltage of 15V is required for its operation.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.In the maximum case, the output current can be 350mA volts.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 600V.For its basis, there are 3 outputs integrated.The output current of this device can be set to 200mA.Its maximum power dissipation of 1.6W shows its power loss capacity without overheating.The power supply of 15V is able to solve the power supply problems for a wide variety of applications.Among the Automotive, AEC-Q100 series, this gate driver is included.
AUIRS2336STR Features
Embedded in the Tape & Reel (TR) package
6 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
28 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.6W
Operating with the supply voltage of Automotive, AEC-Q100
AUIRS2336STR Applications
There are a lot of Infineon Technologies AUIRS2336STR gate drivers applications.
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Pulse transformer drivers
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Head-up and Head mounted displays
- 3-Phase Motor Inverter Driver
- High-speed communications
- Refrigerator
- PCMCIA applications
- Motor Control
- Solar inverters
