AUIRS44261S
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 4.8V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIRS44261S |
| Max Output Current | 2.3A |
| Power Supplies | 15V |
| Power Dissipation | 625mW |
| Propagation Delay | 250 ns |
| Input Type | Inverting |
| Turn On Delay Time | 70 ns |
| Rise Time | 75ns |
| Fall Time (Typ) | 75 ns |
| Turn-Off Delay Time | 65 ns |
| Rise / Fall Time (Typ) | 15ns 25ns |
| Interface IC Type | HALF BRIDGE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.15 μs |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.3A 3.3A |
| Logic Voltage - VIL, VIH | 0.8V 2.7V |
| Turn Off Time | 0.15 μs |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SOURCE SINK |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
AUIRS44261S Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.Gate drivers is packaged in the way of Tube.Configuration is supported by 2 drivers.There is a mounting bracket in the way of Surface Mount.A supply voltage of 4.8V~20V demonstrates its superiority.IGBT, N-Channel, P-Channel MOSFET is the gate type used for this design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Inverting is used as the input type in this program.Mosfet driver is based on 8 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number AUIRS44261S.You mount it with Surface Mount.In the device, there are 8 pins.A supply voltage of 15V is required for operation.The interface IC is referred to as HALF BRIDGE BASED PERIPHERAL DRIVER.As a maximum, there is 2.3A limit to the output current.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.Its maximum power dissipation of 625mW also demonstrates its maximum ability to transfer power without overheating.Based on its power supplies of 15V, it solves the problem of power supply failure for a variety of applications.Among the Automotive, AEC-Q100 series, this gate driver is included.
AUIRS44261S Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 625mW
Operating with the supply voltage of Automotive, AEC-Q100
AUIRS44261S Applications
There are a lot of Infineon Technologies AUIRS44261S gate drivers applications.
- Uninterruptible Power Supplies (UPS)
- Solar inverters
- Portable computers
- Isolated Gate Driver Supplies
- Power factor correction (PFC) circuits
- Solar power supplies
- AC-DC Inverters
- High frequency line drivers
- Active filtering
- Active Clamp Flyback or Forward and Synchronous Rectifier
