AUIRS4426S
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 625mW |
| Technology | CMOS |
| Voltage - Supply | 6V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | AUIRS4426S |
| Max Output Current | 3.3A |
| Power Dissipation | 625mW |
| Output Current | 2.3A |
| Propagation Delay | 150 ns |
| Input Type | Inverting |
| Turn On Delay Time | 35 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 50 ns |
| Turn-Off Delay Time | 50 ns |
| Rise / Fall Time (Typ) | 15ns 25ns |
| Interface IC Type | FULL BRIDGE BASED PERIPHERAL DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.15 μs |
| Output Peak Current Limit-Nom | 2.3A |
| Driven Configuration | Low-Side |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2.3A 3.3A |
| Logic Voltage - VIL, VIH | 0.8V 2.7V |
| Turn Off Time | 0.15 μs |
| Built-in Protections | TRANSIENT |
| Height | 1.4986mm |
| Length | 4.9784mm |
| Width | 3.9878mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AUIRS4426S Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tube is used.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.In the direction of Surface Mount, gate drivers is mounted.In the absence of a 6V~20V supply voltage, it can demonstrate its superiority.A gate type of IGBT, N-Channel, P-Channel MOSFET is used in its design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.Inverting is the input type used in this program.Its configuration is based on a total of 8 terminations.The base part number AUIRS4426S refers to a number of related parts.Mounting the device requires Surface Mount.The pins are configured with 8 when designing the chip.Mosfet driver is designed specifically to run on 15V volts of power.FULL BRIDGE BASED PERIPHERAL DRIVER is employed as its interface IC.In the maximum case, the output current can be 3.3A volts.Mosfet driver supports an output current of 2.3A.Having the maximum power dissipation of 625mW indicates its maximum capacity to conduct power losses without overheating.In the Automotive, AEC-Q100 series, this gate driver is included.
AUIRS4426S Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 625mW
Operating with the supply voltage of Automotive, AEC-Q100
AUIRS4426S Applications
There are a lot of Infineon Technologies AUIRS4426S gate drivers applications.
- Industrial Motor Inverter - Power Tools, Robotics
- Isolated switch mode power supplies (SMPS)
- Motor Drives
- serial peripheral interface (SPI), I2C
- Motor Controls
- Isolated Gate Driver Supplies
- Portable Navigation Devices
- Broadcast equipment
- DC-DC Converters
- Pulse transformer drivers
