AVC16T245DGGR-D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 16T245 |
| Pin Count | 48 |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.2V |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 2.7 ns |
| Turn On Delay Time | 5 ns |
| Family | AVC |
| Logic Function | Translator |
| Data Rate | 380Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -12mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 12mA |
| Control Type | COMMON CONTROL |
| Power Supply Current-Max (ICC) | 0.045mA |
| Translation | 1.5/3.3V&1.5/3.3V |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~3.6V |
| Voltage - VCCB | 1.2V~3.6V |
| Channels per Circuit | 8 |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AVC16T245DGGR-D Overview
In the package 48-TFSOP (0.240, 6.10mm Width), it can be found.Packaged in the way of Tape & Reel (TR).Level translators uses Tri-State, Non-Inverted as level translatorss output configuration.There is a translator type of Voltage Level for this electrical device.Electronic parts are mounted using the Surface Mount method.Level translators has the Channel type Bidirectional.Operation is performed at -40°C~85°C TA.A transmission line can be terminated with 48 terminations.Based on this base part number 16T245, its related parts can be identified.In order for it to operate, it needs to be powered by a voltage of 1.5V.A total of 48 pins are included.There are a number of devices in the 74AVC series.48 pins are used in its design.Level translators is designed wLevel translatorsh 16 bLevel translatorss.Voltages above 3.6V are supported.A minimal voltage of 1.2V is needed to operate it.The VCCA supply rail is configured from 1.2V~3.6V.The VCCB supply rail is configured from 1.2V~3.6V.Level translators has been mounted wLevel translatorsh the method of Surface Mount.Level translators uses a logic IC of type BUS TRANSCEIVER.2 terminations end transmission lines with devices that match their characteristic impedance, which can either be a resistance or an inductor.This electronic device is categorized as a AVC electronic device.In view of its reliable performance, this device can be considered suitable for TR.This device contains 2 elements in its design.
AVC16T245DGGR-D Features
48-TFSOP (0.240, 6.10mm Width) package
48 pin count
74AVC series
48 pins
2 elements
AVC16T245DGGR-D Applications
There are a lot of Texas Instruments AVC16T245DGGR-D voltage translators & level shifters applications.
- Eliminate slow or noisy input signals
- Driving indicator LEDs or buzzers
- Product Traceability
- Handset
- Automotive infotainment
- One Assembly and Test Site
- Servers
- Controlled Baseline
- Push-pull level shifting (UART, SPI, JTAG, and so forth)
- Industrial equipment
