banner_page

AX1000-CQ352M

1.5V V 990 ps ns FPGAs Axcelerator Series 649MHz MHz 352-BFCQFP with Tie Bar 0.5mm mm 352


  • Manufacturer: Microsemi Corporation
  • Nocochips NO: 523-AX1000-CQ352M
  • Package: 352-BFCQFP with Tie Bar
  • Datasheet: PDF
  • Stock: 600
  • Description: 1.5V V 990 ps ns FPGAs Axcelerator Series 649MHz MHz 352-BFCQFP with Tie Bar 0.5mm mm 352 (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status IN PRODUCTION (Last Updated: 3 weeks ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 352-BFCQFP with Tie Bar
Number of Pins 352
Weight 10.567001g
Operating Temperature -55°C~125°C TA
Packaging Tray
Published 2005
Series Axcelerator
JESD-609 Code e0
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 352
ECCN Code 3A001.A.2.C
Terminal Finish Tin/Lead (Sn/Pb)
HTS Code 8542.39.00.01
Subcategory Field Programmable Gate Arrays
Technology CMOS
Voltage - Supply 1.425V~1.575V
Terminal Position QUAD
Terminal Form FLAT
Peak Reflow Temperature (Cel) 225
Supply Voltage 1.5V
Terminal Pitch 0.5mm
Frequency 649MHz
Time@Peak Reflow Temperature-Max (s) 20
Base Part Number AX1000
Number of Outputs 516
Operating Supply Voltage 1.5V
Power Supplies 1.51.5/3.32.5/3.3V
Number of I/O 198
RAM Size 20.3kB
Propagation Delay 990 ps
Turn On Delay Time 990 ps
Programmable Logic Type FIELD PROGRAMMABLE GATE ARRAY
Total RAM Bits 165888
Number of Gates 1000000
Number of LABs/CLBs 18144
Screening Level MIL-STD-883 Class B
Number of Registers 12096
Combinatorial Delay of a CLB-Max 0.99 ns
Height 2.66mm
Length 48mm
Width 48mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant

AX1000-CQ352M Overview


As part of the 352-BFCQFP with Tie Bar package, it is included. A FIELD PROGRAMMABLE GATE ARRAY-based FPGA is one of these types. The I/Os are designed to facilitate a more coherent transfer of data. Supply voltage is 1.5V volts. An FPGA part from the Field Programmable Gate Arrays family. FPGA modules can be attached to development boards using a Surface Mount-connector. Fpga chips operates wFpga chipsh a supply voltage of 1.425V~1.575V. FPGAs belonging to the Axcelerator series are a type of FPGA that belong to the Axcelerator series of FPGAs. The operating temperature should be kept at -55°C~125°C TA when operating. A total of 516 outputs are incorporated into this device. Fpga chips is designed to maximiTraye space efficiency by containing the FPGA model in Tray. In total, it has 352 terminations on each end. Fpga electronics is worth mentioning that this device provides 165888 bfpga electronics s of RAM. If you are looking for related parts, you can use the base part number AX1000 as a starting point. This FPGA module has a RAM si20.3kBe of 20.3kB that is sufficient to make sure that the program is able to run normally. Fpga electronics is designed wfpga electronics h 352 pins. 18144 LABs/CLBs are configured on this FPGA. Fpga electronics is possible for this FPGA to perform as per fpga electronics s specifications as long as fpga electronics is mounted in Surface Mount direction. With a 1.5V supply voltage, designers can fully utilize the flexibility of the device. The device runs on a 1.51.5/3.32.5/3.3V battery and requires no additional power supply to operate. As a basic building block, fpga semiconductor consists of 1000000 gates. To store and transfer data, there are 12096 registers that are used. The high efficiency of this device is provided by its 649MHz-frequency operation.

AX1000-CQ352M Features


198 I/Os
Up to 165888 RAM bits
352 LABs/CLBs
12096 registers
Operating from a frequency of 649MHz

AX1000-CQ352M Applications


There are a lot of Microsemi Corporation AX1000-CQ352M FPGAs applications.

  • Software-defined radio
  • Military DSP
  • Industrial,Medical and Scientific Instruments
  • Device controllers
  • Medical Electronics
  • Ecosystem
  • DO-254
  • OpenCL
  • Medical Applications
  • Integrating multiple SPLDs

Write a review

Note: HTML is not translated!
    Bad           Good