AZ7500EP-E1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Supplier Device Package | 16-DIP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 30V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 15V |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 7V~36V |
| Control Features | Enable |
| Topology | Buck |
| Frequency - Switching | 1kHz~200kHz |
| Synchronous Rectifier | No |
| Max Duty Cycle | 45 % |
| Duty Cycle (Max) | 45% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
AZ7500EP-E1 Overview
It comes in the 16-DIP (0.300, 7.62mm) package, which makes switching controller suitable for most applications. For outputs of 1, this dc motor controller is suitable. Tube is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) can be handled by it. dc control's supply and operating voltages are 7V~36V. Qualified to work in a -40°C~85°C TA dc switcher. Using this switching controller, it is possible to switch at 1kHz~200kHz. It is suitable for general dc dc regulator when it is set to Through Hole. The dcdc regulator features Enable for efficient switching control. There are a total of 8 pins on switching converter. Test statistics indicate DC regulator outputs 30V voltage. It is set to 45 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. This Through Hole makes DC switcher suitable for most prototypes and applications. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 15V. A temperature -40°C lower than -40°C should be maintained. The temperature should not exceed 85°C degrees Celsius. Its supplier dc dc controller package would be 16-DIP. This controller switches with 1 phases.
AZ7500EP-E1 Features
Transistor Driver Outputs
Switching Frequency: 1kHz~200kHz
Enable
Max Duty Cycle: 45 %
AZ7500EP-E1 Applications
There are a lot of Diodes Incorporated AZ7500EP-E1 DC to DC converter applications.
- Direct power supply system
- Precision electronic equipment
- Post equipment
- Electric water heaters
- Sink circuits
- Elevator lighting
- Window air conditioners
- Hydraulic presses
- Nuclear power plants
- Fire elevators
