AZ7500EUP-E1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | PDIP |
| Operating Temperature | -40°C~85°C TA |
| Published | 2016 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 7V~36V |
| Control Features | Enable |
| Topology | Buck |
| Frequency - Switching | 1kHz~200kHz |
| Synchronous Rectifier | No |
| Max Duty Cycle | 45 % |
| Duty Cycle (Max) | 45% |
| Clock Sync | No |
| Output Phases | 1 |
| Number of Output Phases | 1 |
| RoHS Status | ROHS3 Compliant |
AZ7500EUP-E1 Overview
Capsuled in the PDIP package, the switching controller can be used for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. There are Transistor Driver dc switching's output (s) that it can handle. The supply and operating voltage of the dc control are 7V~36V. Qualified to work in a -40°C~85°C TA dc switcher. In this switching controller, the switch can be set to 1kHz~200kHz. Switching control is made easier with the dcdc regulator's Enable. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 45 %. A temperature of -40°C or higher is recommended. There should be 85°C temperature above 85°C degrees Celsius when dc regulator runs. There are 1 phases in this controller.
AZ7500EUP-E1 Features
Transistor Driver Outputs
Switching Frequency: 1kHz~200kHz
Enable
Max Duty Cycle: 45 %
AZ7500EUP-E1 Applications
There are a lot of Diodes Incorporated AZ7500EUP-E1 DC to DC converter applications.
- Post equipment
- Balance equipment
- USB circuits
- Product testing
- Medical monitoring systems
- ATMs
- Combined machine tools
- Direct power supply system
- Computer rooms
- Emergency lighting monitoring equipment
