AZV393MMTR-G1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Supplier Device Package | 8-MSOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | General Purpose |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Output Type | Open Collector |
| Number of Elements | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Output Current | 84mA |
| Propagation Delay | 450 ns |
| Quiescent Current | 200μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 93.97dB |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 200μA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 250nA @ 5V |
| Current - Output (Typ) | 84mA @ 5V |
| Propagation Delay (Max) | 450ns |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AZV393MMTR-G1 Overview
A convenient packaging is provided in the form of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .The comparator has a type Open Collector output.The part is shipped by Tape & Reel (TR) .It's a typical General Purpose comparator.There are a total of 2 elements in it.The recommended mounting method is Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.As a result, this comparator displays a quiescent current of 200μA .There is a Surface Mount on the board for mounting to a PCB or other board.You are allowed to input a maximum current of 250nA into the device.Based on the voltage formula, the voltage gain of the part is 93.97dB .In general, temperatures higher than 85°C are not recommended.Comparator electronics cannot be operated at a temperature lower than -40°C .Compatibility is defined as 5.5V when the comparator is operating at its maximum supply voltage.There is a minimum supply voltage of 2.5V for this comparator.
AZV393MMTR-G1 Features
Open Collector output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 200μA
Voltage Gain: 93.97dB
AZV393MMTR-G1 Applications
There are a lot of Diodes Incorporated AZV393MMTR-G1 linear comparators applications.
- Mobile Phones and Tablets
- Pulse, Squarewave, and Time Delay Generators
- Battery-Powered Electronics
- Point of load regulators
- Limit Comparators
- Current and voltage sensing
- Ultra-Low Power Systems
- Zero-Crossing Detectors
- Window Comparators, Multivibrators
- Self-diagnostics
