B12KV-AH
| Parameters | |
|---|---|
| Actuator Length | 9.40mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Mount | Through Hole, Vertical |
| Mounting Type | Through Hole, Right Angle, Vertical |
| Insulation Material | GLASS FILLED POLYAMIDE |
| Actuator Material | Polyamide (PA), Nylon |
| Center Contact Plating | GOLD OVER SILVER |
| End Contact Plating | GOLD OVER NICKEL |
| Operating Temperature | -30°C~85°C |
| Packaging | Tray |
| Published | 2010 |
| Series | B |
| JESD-609 Code | e4 |
| Feature | Gray Actuator |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | PC Pin |
| Power Rating | 400mW |
| Voltage - Rated DC | 28V |
| Current Rating (Amps) | 0.4VA AC/DC |
| Orientation | Vertical |
| Current Rating | 100mA |
| Termination Style | PC Pin |
| Voltage - Rated AC | 28V |
| Body Length or Diameter | 8.7884mm |
| Body Breadth | 8.001 mm |
| Actuator Type | Snap On Paddle |
| Circuit | SPDT |
| Switch Function | On-On |
| Contact Resistance | 0.05mOhm |
| Insulation Resistance | 500000000Ohm |
| Sealing | EPOXY |
| Dielectric Withstanding Voltage | 500VAC V |
| Electrical Life | 50,000 Cycles |
| Illumination | Non-Illuminated |
| Switch Type | TOGGLE SWITCH |
| Bushing Thread | Unthreaded |
| PCB Hole Count | 5 |
| Solderability | WAVE |
| Bushing Length | 0.106 inch |
| Life (Cycles) | 50000 cycles |
| Washability | SOLVENT |
| Body Height | 29.5656mm |
| Length - Termination | 0.161 inch |
See Relate Datesheet
