B5S162861TTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | Bus Switch |
| Resistance | 35Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 20 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | B5S162 |
| Pin Count | 48 |
| Circuit | 10 x 1:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 1.25 ns |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
B5S162861TTR Overview
For the purpose of saving board space, digital switch is included in the 48-TFSOP (0.240, 6.10mm Width).Tape & Reel (TR) is the method used for packaging.Surface Mount is the mounting method digital switch ic uses.As the analog part, the circuit uses an analog IC Bus Switch.If the operating temperature is maintained at -55°C~125°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 4V~5.5V, designers have superior flexibility.As part of its basic configuration, 48 terminations are designed as a part of it.The base part number is B5S162, so you can find its logic switch related parts using that number.In this case, 4.5V is the voltage supplied to the multiplexer's system.This turn signal switch consists of 48 component pins.It is the end of conductors that is represented by GULL WING.The supply type of this multiplexer ic is Single.A configuration of 48 pins is used.Multiplexer ics are mounted in the direction of Surface Mount.There are 1 bits signal multiplexer provides.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.There is a power supply provided for the mux switch's normal operation of 5V.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.As far as the resistance is concerned, it operates with 2.The resistance of the signal switching is 35Ohm.
B5S162861TTR Features
Supplied in the 48-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
B5S162861TTR Applications
There are a lot of STMicroelectronics B5S162861TTR Signal Switches / Multiplexers / Decoders applications.
- Computer memory
- Automation system
- Memory chips
- CPU memory location identification
- Idle motor
- Arithmetic Logic Units
- Logic circuits
- HD surveillance system
- Microprocessor input/output systems
- PCIe
