B5S16862TTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Type | Bus Switch |
| Resistance | 14Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 20 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | B5S168 |
| Pin Count | 48 |
| Circuit | 5 x 1:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 4 |
| Height Seated (Max) | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
B5S16862TTR Overview
Digital switch is provided in the 48-TFSOP (0.240, 6.10mm Width) for the purpose of saving board space.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.In the case of -55°C~125°C, turn signal switch will not be affected by external factors.With a supply voltage of 4V~5.5V, designers have greater flexibility of digital controlled switch.There are 48 terminations included in its basic configuration.There is a base part number of B5S168 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is powered by 4.5V volts.This turn signal switch has a total of 48 component pins.Conductors terminate at GULL WING in this design.In this case, the supply type is Single.Currently, it is configured with a 48 pin configuration.The multiplexer ic is mounted in the direction of Surface Mount.Signal multiplexer provides 1 bits.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V in order to prevent some unnecessary failures.A power supply is provided for mux switch's normal operation of 5V.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.The resistance of the signal switching is 2.With a resistance of 14Ohm, it operates.
B5S16862TTR Features
Supplied in the 48-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
B5S16862TTR Applications
There are a lot of STMicroelectronics B5S16862TTR Signal Switches / Multiplexers / Decoders applications.
- Code converters
- HDMI applications
- Medium scale TV wall
- PCIe
- CPU memory location identification
- Enabling block of memory depending on address in memory chips
- Night vision cameras
- Automatic health monitoring systems
- HD surveillance system
- Relay
