Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Copper, Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.173, 4.40mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
JESD-609 Code |
e2 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Tin/Copper (Sn/Cu) |
Subcategory |
Comparator |
Max Power Dissipation |
490mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
10 |
Base Part Number |
BA10339 |
Pin Count |
14 |
Output Type |
Open Collector |
Number of Elements |
4 |
Power Supplies |
+-1.5/+-18/3/36V |
Nominal Supply Current |
1mA |
Output Current |
16mA |
Max Supply Current |
2mA |
Quiescent Current |
2mA |
Response Time |
1.3 μs |
Voltage - Supply, Single/Dual (±) |
3V~36V ±1.5V~18V |
Output Current per Channel |
6mA |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
106dB |
Average Bias Current-Max (IIB) |
0.25μA |
Supply Voltage Limit-Max |
36V |
Max Input Current |
250nA |
Input Bias Current |
250nA |
Voltage - Input Offset (Max) |
5mV @ 5V |
Current - Input Bias (Max) |
0.25μA @ 5V |
Current - Output (Typ) |
16mA @ 5V |
Height Seated (Max) |
1.6mm |
Length |
8.7mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
BA10339F-E2 Overview
Electronic comparator is packaged in 14-SOIC (0.173, 4.40mm Width) for convenient transportation.Output type Open Collector is used for this comparator.The chip is packaged with Tape & Reel (TR) .The comparator has a total of 14 terminals.Electronic comparator is a component of the Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .In total, it contains 4 elements.The board includes 14 pins.The recommended mounting method is Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator has 14 pins.In order to find a solution that meets your specific needs, search BA10339 for more pin-to-pin solutions.There is a quiescent current of 2mA in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current of the device be 1mA .An excess of current supply over 2mA could result in malfunction of the comparator.A power supply of +-1.5/+-18/3/36V is sufficient for the operation of the device.You are allowed to input a maximum current of 250nA into the device.Comparator electronics follows that the voltage gain of the part is 106dB .
BA10339F-E2 Features
Open Collector output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 2mA
Voltage Gain: 106dB
BA10339F-E2 Applications
There are a lot of ROHM Semiconductor BA10339F-E2 linear comparators applications.
- Pulse, Squarewave, and Time Delay Generators
- Point of load regulators
- Battery management and protection
- Notebooks and PDAs
- High-Speed Sampling Circuits
- Set Top Boxes
- General Purpose Low Voltage Applications
- Multivibrators and High-Voltage Digital Logic Gates
- Self-diagnostics
- Handheld Instruments