BA2901F-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | TIN |
| Subcategory | Comparator |
| Max Power Dissipation | 490mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | BA2901 |
| Pin Count | 14 |
| Output Type | Open Collector |
| Number of Elements | 4 |
| Power Supplies | +-1/+-18/2/36V |
| Nominal Supply Current | 2mA |
| Power Dissipation | 610W |
| Output Current | 16mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height | 1.39mm |
| Length | 8.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BA2901F-E2 Overview
Electronic comparator is packaged in 14-SOIC (0.173, 4.40mm Width) for convenient transportation.This comparator is of the Open Collector output type.This chip is designed with the Tape & Reel (TR) package.There are14 terminals on the comparator.The electrical component in this case belongs to the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.It's a typical General Purpose comparator.Currently, it consists of only 4 elements.The pinout of the component starts from 14 pins it has.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.There are 14 pins on the comparator.You can search BA2901 if you are looking for more pin-to-pin solutions.The comparator presents a quiescent current of 2mA volts.Mounting on PCBs or other boards is easy with the Surface Mount .Normal use of the device should require a nominal supply current of 2mA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 2mA .There is sufficient power to run the device from +-1/+-18/2/36V power supplies.Input current to the device cannot exceed 250nA .Comparator electronics follows that the voltage gain of the part is 100dB .
BA2901F-E2 Features
Open Collector output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2mA
Voltage Gain: 100dB
BA2901F-E2 Applications
There are a lot of ROHM Semiconductor BA2901F-E2 linear comparators applications.
- Window Comparators, Multivibrators
- Portable Battery Monitoring
- Body Control Modules
- Motor drives
- Industrial
- DC/DC and AC/DC power supplies
- High-Speed Differential Line Receiver
- Automatic Test Equipment
- Power Supervision
- Appliances
