BA2901FV-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-LSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | TIN COPPER |
| Subcategory | Comparator |
| Max Power Dissipation | 790mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | BA2901 |
| Pin Count | 14 |
| Output Type | Open Collector |
| Number of Elements | 4 |
| Power Supplies | +-1/+-18/2/36V |
| Nominal Supply Current | 2mA |
| Output Current | 16mA |
| Max Supply Current | 2mA |
| Quiescent Current | 2mA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.5μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 0.25μA @ 5V |
| Current - Output (Typ) | 16mA @ 5V |
| Height Seated (Max) | 1.25mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BA2901FV-E2 Overview
Electronic comparator is packaged in 14-LSSOP (0.173, 4.40mm Width) for convenient transportation.A comparator with an output type of Open Collector is being used.Ready for shipping in Tape & Reel (TR) package.The comparator has 14 terminals.Electronic comparator is a component of the Comparator family.A comparator supplied with 5V voltage can complete many demanding tasks.This is a typical comparator of type General Purpose .Currently, it consists of only 4 elements.A total of 14 pins are included.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.14 pins are present on the comparator.Try search BA2901 to get more pin-to-pin solutions for your special needs.There is a quiescent current of 2mA in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Normally, the nominal supply current should be 2mA .Current supply exceeding 2mA could cause disfunction of the compartator.A power supply of +-1/+-18/2/36V is sufficient for the operation of the device.Input current to the device is limited to 250nA .Comparator electronics is clear from the voltage formula that the voltage gain of the part is 100dB .
BA2901FV-E2 Features
Open Collector output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 2mA
Voltage Gain: 100dB
BA2901FV-E2 Applications
There are a lot of ROHM Semiconductor BA2901FV-E2 linear comparators applications.
- Alarm and Monitoring Circuits
- Power Supervision
- Threshold Detectors
- Wearable Devices
- Mobile Phones
- System control and monitoring
- General-Purpose Portable Devices
- Zero-Crossing Detectors
- Wireless Base Stations
- Building automation
