BA6418N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 9-SIP |
| Number of Pins | 9 |
| Operating Temperature | -20°C~60°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3/e2 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Terminal Finish | TIN/TIN COPPER |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Bipolar |
| Voltage - Supply | 4.5V~15V |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 9V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 10 |
| Base Part Number | BA641* |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Operating Supply Voltage | 15V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 34mA |
| Output Configuration | Half Bridge (2) |
| Current - Output | 700mA |
| Supply Current-Max (Isup) | 70mA |
| Voltage - Load | 4.5V~15V |
| Motor Type - AC, DC | Brushed DC |
| Height Seated (Max) | 7.2mm |
| Width | 2.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BA6418N Overview
The design contains a Tubepackage.There is 9-SIP case included with the part.Drivers controllers is recommended to mount the part by Through Hole.I believe it is suitable for the component connected to General Purpose.The device is capable of supplying a voltage of 4.5V~15V volts.There is a temperature range of -20°C~60°C TAin which this device operates.The motor type can be classified as Brushed DC.The part supports 9terminations.In this case, the voltage can be applied to the load at the rate of 4.5V~15V.Drivers controllers is important to remember that this amplifier should be run at 9V.Through Holeis its recommended mounting method.Set the part's output current to 700mA.This device utilizes the BRUSH DC MOTOR CONTROLLERanalog integrated circuit.BA641*is the part number that finds it.9pins are available on the device.Drivers controllers belongs to Motion Control Electronics series.There are a total of 1outputs available.The driver operates on a supply voltage of 15V volts.
BA6418N Features
Applications : General Purpose
Load voltage across the chip 4.5V~15V
base on BA641* number
designed with 1 outputs
BA6418N Applications
There are a lot of ROHM Semiconductor BA6418N motor drivers applications.
- Handheld devices
- Step-up or step-down driver topologies
- High power LED street light
- Commercial office
- Tail lights
- Horticultural lighting
- RGB and monochromatic LED drivers for signage and traffic signals
- Digital still cameras
- Outdoor area lights
- Automotive instrumentation
