BCR402RE6327HTSA1
| Parameters | |
|---|---|
| Nominal Supply Current | 540μA |
| Power Dissipation | 330mW |
| Output Current | 60mA |
| Voltage - Output | 16V |
| Min Input Voltage | 1.2V |
| Max Input Voltage | 18V |
| Halogen Free | Not Halogen Free |
| Internal Switch(s) | Yes |
| Number of Segments | 1 |
| Multiplexed Display Capability | NO |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-143R |
| Number of Pins | 4 |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | Automotive, AEC-Q101 |
| JESD-609 Code | e3 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Linear |
| Resistance | 143Ohm |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Applications | Lighting |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Current Rating | 65mA |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BCR402 |
| Number of Outputs | 1 |
| Max Output Current | 20mA |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 1.2V |
BCR402RE6327HTSA1 Overview
In order to save board space, the SOT-143R package is used. A LED driver using this design has 1 outputs.Mounting is done according to the Surface Mount method.With high reliability and efficiency, this emerges as a Linear.There are considerable benefits for Lighting.For its operation, 4 terminations are designed.Its configuration is based on 4 pins.There are 1 segments in it.The mount is in the direction of Surface Mount.This LED driver can be found under the base part number BCR402.A maximum supply voltage of 18V is acceptable.The voltage at the output terminal is 16V.The minimal input voltage is 1.2V.As a result, it runs at a minimal voltage of 1.2V in order to achieve the best efficiency.Supply current cannot exceed 18V.Temperatures should not exceed 150°C in order to ensure stable operation.There is no current available to supply to the load.Stable operation requires a temperature higher than -40°C.LED drivers are able to deliver all the benefits of LEDs at their maximum output current of 20mA.There are many applications for this LED driver belonging to the Automotive, AEC-Q101 series.
BCR402RE6327HTSA1 Features
Available in the SOT-143R package
Supply voltage of 10V
BCR402RE6327HTSA1 Applications
There are a lot of Infineon Technologies BCR402RE6327HTSA1 LED Driver ICs applications.
- Flicker-free LED Lighting using R1580N
- OLED power supply for portable equipment
- Stage Lighting and Signage
- Scanners and Handy Terminals
- Other Electronic Devices
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Portable lighting
- Stage and Studio lighting
- A- lamps
- Sports Facility Lighting
