BCR402UE6327HTSA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74, SOT-457 |
| Number of Pins | 6 |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | Automotive, AEC-Q101 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Linear |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | 0°C |
| Applications | Lighting |
| Max Power Dissipation | 750mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Terminal Pitch | 0.95mm |
| Current Rating | 65mA |
| Base Part Number | BCR402 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Max Output Current | 20mA |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 1.4V |
| Nominal Supply Current | 420μA |
| Power Dissipation | 500mW |
| Output Current | 20mA |
| Max Output Voltage | 38V |
| Min Input Voltage | 1.4V |
| Max Input Voltage | 40V |
| Halogen Free | Not Halogen Free |
| Output Current per Channel | 65mA |
| Internal Switch(s) | Yes |
| Number of Segments | 1 |
| Max Junction Temperature (Tj) | 150°C |
| Multiplexed Display Capability | NO |
| Height | 1.1mm |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BCR402UE6327HTSA1 Overview
On the board, there is also a SC-74, SOT-457 package that saves space.There are 1 outputs used for the design of this LED drivers.We are using Surface Mount as the mounting method.There is no doubt that this is a very efficient and reliable Linear.There are many benefits for Lighting.It is designed to work with 6 terminations.There are 6 pins on the base of this LED driver.The number of segments is 1.There is a mounting of it by Surface Mount.The LED driver can be found under the base part number BCR402.40V is a maximum acceptable voltage for the supply.A device with 6 pins is available.The minimal input voltage is 1.4V.It works with the minimal supply voltage of 1.4V to meet highest efficiency standards.It is possible to supply current up to 40V.In order to ensure stable operation, the operating temperature should not exceed 150°C.The load is capable of receiving 20mA current.As a condition for achieving stable operation, the operating temperature should be greater than 0°C.At maximum output current 20mA, it will deliver all the benefits of a LED driver.Several applications make use of this LED driver from the Automotive, AEC-Q101 series.If the output voltage exceeds 38V, it should be corrected.
BCR402UE6327HTSA1 Features
Available in the SC-74, SOT-457 package
Supply voltage of 10V
BCR402UE6327HTSA1 Applications
There are a lot of Infineon Technologies BCR402UE6327HTSA1 LED Driver ICs applications.
- Linear fluorescent
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Dimmable LED for vehicle interiors
- Panel lighting
- Street lighting
- Stage Lighting and Signage
- LED Lighting PFCs, Linear Dimmable
- Flicker-free LED Lighting using R1580N
- OLED power supply for portable equipment
- Gallery lighting
