BCR420UE6327HTSA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74, SOT-457 |
| Number of Pins | 6 |
| Packaging | Cut Tape (CT) |
| Published | 2005 |
| Series | Automotive, AEC-Q101 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Linear |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | 0°C |
| Applications | Lighting |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Current Rating | 150mA |
| Base Part Number | BCR420 |
| Number of Outputs | 1 |
| Max Output Current | 150mA |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 1.4V |
| Power Dissipation | 1W |
| Output Current | 150mA |
| Max Output Voltage | 38V |
| Min Input Voltage | 1.4V |
| Max Input Voltage | 40V |
| Halogen Free | Not Halogen Free |
| Output Current per Channel | 200mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 2 |
| Max Junction Temperature (Tj) | 150°C |
| Switching Frequency | 10kHz |
| Multiplexed Display Capability | NO |
| Height | 1.1mm |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BCR420UE6327HTSA1 Overview
SC-74, SOT-457 saves board space. LED drivers design with 1 outputs.Surface Mount is used for mounting the led light driver.In this case, it emerges as a Linear with a high efficiency.It is clear that Lighting will benefit from the program.In this case, it operates with terminations of 0.The base of this board is configured as 6 pins.Based on our estimates, there are 2 segments.It has been mounted on Surface Mount.There is a base part number BCR420 for this LED driver.It is acceptable to have a maximum voltage of 40V.This device requires a minimum voltage of 1.4V volts.For maximum efficiency, it operates at the minimal voltage of 1.4V.There is 40V maximum value for supply current.In order to ensure stable operation, the operating temperature should not exceed 150°C.There is no current available to supply to the load.Stable operation requires a temperature greater than 0°C.The electronic component can fully perform its functions if the switching frequency is maintained at 10kHz.LED drivers are able to deliver all the benefits of LEDs at their maximum output current of 150mA.Several applications make use of this LED driver from the Automotive, AEC-Q101 series.Ideally, the output voltage should not exceed 38V.
BCR420UE6327HTSA1 Features
Available in the SC-74, SOT-457 package
Switching frequency of 10kHz
BCR420UE6327HTSA1 Applications
There are a lot of Infineon Technologies BCR420UE6327HTSA1 LED Driver ICs applications.
Stage and Studio lighting
General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
Auxiliary lights for on-vehicle cameras
Museum lighting
Street lighting
Flicker-free LED Lighting using R1580N
Other Electronic Devices
OLED power supply for portable equipment
Portable lighting
Power source for accessories such as car audios, car navigation systems, and ETC systems
