BD1204GWL-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-UFBGA, WLCSP |
| Number of Pins | 14 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 50 |
| Type | DC DC Regulator |
| Subcategory | Display Drivers |
| Max Power Dissipation | 840mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Frequency | 850kHz |
| Base Part Number | BD1204 |
| Pin Count | 15 |
| JESD-30 Code | S-PBGA-B50 |
| Number of Outputs | 4 |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Output Current | 20mA |
| Max Supply Current | 42.5mA |
| Topology | Switched Capacitor (Charge Pump) |
| Output Current per Channel | 20mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Voltage - Supply (Min) | 2.7V |
| Height Seated (Max) | 0.55mm |
| Length | 1.85mm |
| Width | 1.85mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
BD1204GWL-E2 Overview
Save board space with 14-UFBGA, WLCSP package. LED drivers have a total of 4 outputs that are used in the design of the drivers.To mount, use Surface Mount.With high efficiency, it appears as a DC DC Regulator.It is capable of operating at a temperature of -30°C~85°C TA. In this case, the frequency is 850kHz.The system operates with a termination of 0.The LED light driver is configured with a base of 0 pins.A voltage supply less than 2.7V will cause undetermined failures.Surface Mount is mounted on it.It is under the base part number BD1204 that the LED driver can be found.The voltage of 5.5V can be supplied.It is equipped with 15 pin count.As a result, its characteristics can also be categorized as Display Drivers.It is capable of delivering high efficiency when the maximal supply current is below 42.5mA.It is possible to supply the load with 20mA current.
BD1204GWL-E2 Features
Available in the 14-UFBGA, WLCSP package
Operating temperature of -30°C~85°C TA
Frequency of 850kHz
Supply voltage of 3.6V
BD1204GWL-E2 Applications
There are a lot of ROHM Semiconductor BD1204GWL-E2 LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- A- lamps
- Museum lighting
- Gallery lighting
- General lighting
- Amusement Machines
- Street lighting
- Portable lighting
- Refrigeration lighting
- Scanners and Handy Terminals
