BD1603NUV-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 238kHz 642kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BD1603 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.6V |
| Power Dissipation | 700mW |
| Voltage - Output | 4.5V |
| Topology | Switched Capacitor (Charge Pump) |
| Current - Output / Channel | 190mA |
| Internal Switch(s) | Yes |
| Voltage - Supply (Max) | 5.5V |
| Voltage - Supply (Min) | 2.7V |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
BD1603NUV-E2 Overview
As a result of its 10-VFDFN Exposed Pad package, it helps to save board space on the board. The LED driver's design uses 1 outputs.In order to mount the led light driver, Surface Mount is used.With high efficiency, it emerges as a DC DC Regulator.It is able to work normally at the operating temperature of -30°C~85°C TA.Taking advantage of Backlight has considerable benefits.As a result, it operates on the basis of frequency 238kHz 642kHz.For its operation, terminations with a value of 0 are used.With 10 pins at the base, this LED driver has a base configuration.It is inevitable that there will be undetermined failures when the supply voltage is less than 2.7V.The mount is in the way of Surface Mount.LED drivers can be found under the base part number BD1603.This device has an output voltage of 4.5V volts.Supply voltage can be set to a maximum value of 5.5V.Depending on its characteristics, it is classified into Display Drivers.
BD1603NUV-E2 Features
Available in the 10-VFDFN Exposed Pad package
Operating temperature of -30°C~85°C TA
Frequency of 238kHz 642kHz
Supply voltage of 3.6V
BD1603NUV-E2 Applications
There are a lot of ROHM Semiconductor BD1603NUV-E2 LED Driver ICs applications.
- White LED Backlight for portable equipment
- Industrial LED Lighting: Image Recognition Devices
- A- lamps
- General lighting
- Auxiliary lights for on-vehicle cameras
- Stage and Studio lighting
- Refrigeration lighting
- Down lights
- Stage Lighting and Signage
- LED backlight driver for LCD displays for Tablets and Note PCs
