BD1606MVV-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Max Power Dissipation | 750mW |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Frequency | 1MHz |
| Base Part Number | BD1606 |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Output Voltage | 4.7V |
| Operating Supply Voltage | 5.5V |
| Power Dissipation | 750mW |
| Output Current | 32mA |
| Topology | Switched Capacitor (Charge Pump) |
| Current - Output / Channel | 20mA |
| Internal Switch(s) | Yes |
| Dimming | I2C |
| Number of Segments | 6 |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 950μm |
| Length | 4.2mm |
| Width | 4.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
BD1606MVV-E2 Overview
The 16-VQFN Exposed Pad package is used for saving board space. 6 outputs are designed into LED drivers.As far as mounting is concerned, Surface Mount is adopted.With high reliability and efficiency, this emerges as a DC DC Regulator.It is capable of operating at a temperature of -30°C~85°C TA. The benefits of Backlight are considerable.The system operates on the basis of the frequency 1MHz.In this case, there are 16 terminations.There are 16 pins on the base of this LED driver.If the voltage supply is below 2.7V, undetermined failures may occur.It is estimated that there are 6 segments.Surface Mount is mounted on it.It is under the base part number BD1606 that you can find this LED driver.On it, there are 16 pins.Further, its characteristics allow it to be classified as Display Drivers.32mA is the maximum amount of current that can be supplied to the load.Powering systems requires 5.5V voltages.The output voltage is 4.7V.
BD1606MVV-E2 Features
Available in the 16-VQFN Exposed Pad package
Operating temperature of -30°C~85°C TA
Frequency of 1MHz
Supply voltage of 3.6V
Operating with the supply voltage of 5.5V
Output voltage of 4.7V
BD1606MVV-E2 Applications
There are a lot of ROHM Semiconductor BD1606MVV-E2 LED Driver ICs applications.
- Portable lighting
- Constant Voltage Power Source for portable equipment
- LED Lightings for Inspection Devices
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Gallery lighting
- LED Lighting PFCs, Linear Dimmable
- Replacement lamps
- Dimmable LED for vehicle interiors
- Linear fluorescent
- Other Electronic Devices
