BD1LB500EFJ-CE2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2015 |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Current - Output (Max) | 1mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 3.5V~5.5V |
| Input Type | CMOS |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Fault Protection | Over Current, Over Temperature, UVLO |
| Rds On (Typ) | 300m Ω |
| RoHS Status | ROHS3 Compliant |
BD1LB500EFJ-CE2 Overview
A Cut Tape (CT) is used to package it.In the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package, it is included.The lighting driver has the mounting type Surface Mount.It owns General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.There are 1 outputs available on this lighting driver.The LED driving board operates with a supply voltage of 3.5V~5.5V.A maximum output voltage of P-Channel volts can be obtained with this LED driver.The maximum output of the LED driving board is 1mAV.A component of this type is included in the Automotive, AEC-Q100 series.The interface to the LED driver is BUFFER OR INVERTER BASED PERIPHERAL DRIVER type.
BD1LB500EFJ-CE2 Features
BD1LB500EFJ-CE2 Applications
There are a lot of ROHM Semiconductor BD1LB500EFJ-CE2 Power Switches ICs applications.
- Hot Swap
- Solid-State Drives
- Wireless Modem Data Cards
- Portable/Handheld Devices
- USB Protection
- HDD and SSD
- HDD, SSD
- Wearable Devices
- Wireless Headsets
- Storage (HDDs, SSDs)
