BD2041AFJ-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 560mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 1A |
| Base Part Number | BD20*1A |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Nominal Supply Current | 90μA |
| Output Configuration | High Side |
| Power Dissipation | 560mW |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Output Power | 560mW |
| Max Output Voltage | 6V |
| Switch Type | USB Switch |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 80m Ω |
| Turn Off Time | 40 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD2041AFJ-E2 Overview
The LED driver's packaged as a Tape & Reel (TR).In the 8-SOIC (0.154, 3.90mm Width) package, it is included.This LED driving board is mounted using the mounting type Surface Mount.USB Switch is the type of switch owned by it.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.By default, it is set to output 1.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.In terms of features, the LED driving board has Status Flag.As you can see, it comes from the BD20*1A family.It contains 8 terminations.During operation, the 8 pins are used.The LED driving board has a total of 1 functions.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.High efficiency is possible at 5V supply voltage.It is positioned in the direction of Surface Mount.The LED driving board is equipped with a total of 8 pins.Lighting drivers with 80mOhm resistance are used.It is set to 500mA in this case.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.For normal operation, the supply voltage (Vsup) should be kept above 2.7V.It has a power supply of 5V.The maximum input voltage is 5.5V volts.
BD2041AFJ-E2 Features
Supplied from 5V
Resistance of 80mOhm
BD2041AFJ-E2 Applications
There are a lot of ROHM Semiconductor BD2041AFJ-E2 Power Switches ICs applications.
- Portable Devices
- Low Voltage I/O System Power
- Gaming
- PC Cards
- HDD, SSD
- Solid State Drivers
- Solid-State Drives
- Wearable Devices
- Wireless Modem Data Cards
- Portable Music Players
