BD2045AFJ-E2
| Parameters | |
|---|---|
| Resistance | 100MOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 560mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 500mA |
| Base Part Number | BD20*5A |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | N-Channel |
| Max Output Current | 250mA |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Nominal Supply Current | 90μA |
| Output Configuration | High Side |
| Power Dissipation | 560mW |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Output Power | 560mW |
| Max Output Voltage | 6V |
| Switch Type | USB Switch |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 80m Ω |
| Turn Off Time | 40 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
BD2045AFJ-E2 Overview
Tape & Reel (TR) is how it's packaged.Package 8-SOIC (0.154, 3.90mm Width) contains it.This LED driving board is mounted using the mounting type Surface Mount.There is a switch type of USB Switch.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver is equipped with 1 outputs that can be used.Operation is based on Not Required supply voltage.The maximum output voltage is N-Channel volts.A lighting driver with Status Flag features is available.It belongs to the family BD20*5A.It contains 8 terminations.The 8 pins are used for the operation of the system.The LED driving board has a total of 1 functions.Maximum output current falls to 250mA when operation criteria are met.With a supply voltage of 5V, high efficiency is possible.As a result, it is mounted in the manner of Surface Mount.As a result, it has a total of 8 pins.100MOhm resistance is present in the lighting driver.In this case, the output current is set to 250mA.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 2.7V.It has a power supply of 5V.Input voltage is limited to 5.5V volts.
BD2045AFJ-E2 Features
Supplied from 5V
Resistance of 100MOhm
BD2045AFJ-E2 Applications
There are a lot of ROHM Semiconductor BD2045AFJ-E2 Power Switches ICs applications.
- Hot Swap
- Hot-Swap Systems
- Wearable Devices
- HDD and SSD
- PDAs
- Storage Drives
- Gaming
- Notebook and Tablet Computers
- Wireless Modem Data Cards
- Mobile Communication Devices
