BD2046AFJ-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 500mA |
| Base Part Number | BD20*6A |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Nominal Supply Current | 110μA |
| Output Configuration | High Side |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Output Power | 560mW |
| Switch Type | USB Switch |
| Output Current per Channel | 250mA |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 100m Ω |
| Turn Off Time | 40 µs |
| Built-in Protections | OVER CURRENT |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD2046AFJ-E2 Overview
It is packaged in the manner of a Tape & Reel (TR).This package is included in 8-SOIC (0.154, 3.90mm Width).This lighting drivere has a mounting type of Surface Mount.USB Switch is the switch type it owns.To ensure reliable operation, set the temperature to -40°C~85°C TA.The LED driver is equipped with 2 outputs.It uses a supply voltage of Not Required to operate.The maximum output voltage is N-Channel volts.Features of the lighting driver are Status Flag.This object belongs to the BD20*6A family.A total of 8 terminations have been found in it.8 pins are used for operation.As far as functions are concerned, the lighting driver has 1.To meet the operation criteria, the maximum output current drops to 500mA.It is possible to achieve a high level of efficiency with a supply voltage of 5V.The lighting driver is mounted in the direction of Surface Mount.The LED driving board is equipped with a total of 8 pins.It has 100mOhm resistance.When this case is used, the output current is set to 250mA.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.A maximum supply voltage of 5.5V is set in Vsup.There is a voltage supply of 5V volts on this part.
BD2046AFJ-E2 Features
Supplied from 5V
Resistance of 100mOhm
BD2046AFJ-E2 Applications
There are a lot of ROHM Semiconductor BD2046AFJ-E2 Power Switches ICs applications.
- Portable GPS Device
- PDAs
- PC Card Hot Swap
- USB Power Distribution
- Notebook and Tablet Computers
- Hard Disk Drives
- Smartphone and PDA
- Solid-State Drives
- Hot-Swap Systems
- Notebook PC
