BD2051AFJ-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 560mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 1A |
| Base Part Number | BD20*1A |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Nominal Supply Current | 90μA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Output Power | 560mW |
| Turn On Delay Time | 20 ms |
| Switch Type | USB Switch |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD2051AFJ-E2 Overview
It is packaged in the form of a Tape & Reel (TR).In the 8-SOIC (0.154, 3.90mm Width) package, it is included.Mounting type Surface Mount is selected for the LED driving board.USB Switch is the switch type it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver has a total of 1 outputs.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.A lighting driver with Status Flag features is available.There is a BD20*1A family of things that it belongs to.There are 8 terminations in it.The operation is performed through the 8 pins.There are 1 functions of the LED driver.To comply with the operation criteria, the maximum output current is reduced to 500mA.A supply voltage of 5V leads to high efficiency.It is mounted in the way of Surface Mount.In total, it has 8 pins.In this LED driving board, there is 100mOhm resistance.In this case, the output current will be set to 500mA.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.The maximum supply voltage is set to 5.5V.The supply voltage (Vsup) should be kept above 2.7V for normal operation.In this part, the power supply is set to 5V.
BD2051AFJ-E2 Features
Supplied from 5V
Resistance of 100mOhm
BD2051AFJ-E2 Applications
There are a lot of ROHM Semiconductor BD2051AFJ-E2 Power Switches ICs applications.
- Gaming
- Portable Devices
- Hot-Swap Systems
- Set-Top Boxes
- Smartphone and PDA
- Wireless Modem Data Cards
- HDD and SSD
- Solid-State Drives
- USB Power Distribution
- Handheld Devices
