BD2061AFJ-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 100MOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 560mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 1.5A |
| Base Part Number | BD206*A |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Nominal Supply Current | 90μA |
| Output Configuration | High Side |
| Power Dissipation | 560mW |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Output Power | 560mW |
| Max Output Voltage | 6V |
| Switch Type | USB Switch |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 1.5A |
| Rds On (Typ) | 80m Ω |
| Turn Off Time | 40 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD2061AFJ-E2 Overview
It is packaged in the manner of a Tape & Reel (TR).It is included with the 8-SOIC (0.154, 3.90mm Width) package as well.It has been mounted as Surface Mount on the LED driver.It owns USB Switch switch type.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The LED driver has 1 outputs.To operate, it needs a supply voltage of Not Required.The maximum output voltage is N-Channel volts.A lighting driver with Status Flag features is available.There is a BD206*A family of things that it belongs to.In total, there are 8 terminations.The operation is performed through the 8 pins.The LED driver has 1 functions.As a result, the maximum output current is reduced to 1A in order to meet the operation requirements.The supply voltage of 5V is conducive to high efficiency.The LED driving board is mounted in the way of Surface Mount.A total of 8 pins are included in this LED driver.There is 100MOhm resistance on the LED driver.This results in a 1A output current.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.For normal operation, the supply voltage (Vsup) must be kept above 2.7V.In this part, the power supply is set to 5V.A maximum input voltage of 5.5V volts can be applied to it.
BD2061AFJ-E2 Features
Supplied from 5V
Resistance of 100MOhm
BD2061AFJ-E2 Applications
There are a lot of ROHM Semiconductor BD2061AFJ-E2 Power Switches ICs applications.
- PDAs
- Storage Drives
- Hot Swaps
- Portable Music Players
- USB3.1 Power Delivery
- USB Power Distribution
- Portable GPS
- Storage (HDDs, SSDs)
- Hot-Swap Systems
- Solid State Drivers
