BD2065AFJ-E2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 100MOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 560mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 1.5A |
| Base Part Number | BD206*A |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | On/Off |
| Nominal Supply Current | 90μA |
| Output Configuration | High Side |
| Power Dissipation | 560mW |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Output Power | 560mW |
| Max Output Voltage | 6V |
| Switch Type | USB Switch |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 1.5A |
| Rds On (Typ) | 80m Ω |
| Turn Off Time | 40 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD2065AFJ-E2 Overview
It is package in Tape & Reel (TR) case.The 8-SOIC (0.154, 3.90mm Width) package includes it.This lighting drivere has a mounting type of Surface Mount.This switch is of type USB Switch.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.As a default, the output is set to 1.A supply voltage of Not Required is required for it to operate.The maximum output voltage is N-Channel volts.In terms of features, the LED driving board has Status Flag.The BD206*A family consists of this type.It has a total of 8 terminations.8 pins are used for operation.The LED driving board has a total of 1 functions.It is necessary to reduce the maximum output current to 1A to meet the operation criteria.A supply voltage of 5V leads to high efficiency.In this case, it is mounted in the way of Surface Mount.A total of 8 pins are present on it.It has a resistance of 100MOhm.The output current is set to 1A in this case.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The supply voltage (Vsup) should be kept above 2.7V for normal operation.A 5V power supply is used by the part.Its maximum input voltage is 5.5V volts.
BD2065AFJ-E2 Features
Supplied from 5V
Resistance of 100MOhm
BD2065AFJ-E2 Applications
There are a lot of ROHM Semiconductor BD2065AFJ-E2 Power Switches ICs applications.
- Hot-Swap Systems
- USB Ports/Hubs
- HDD, SSD
- Smart Phones, Feature Phones
- Portable Music Players
- PDAs
- Wireless Headsets
- USB Power Distribution
- PC Card Hot Swap
- HDD and SSD
