BD2206G-TR

3.3V PMIC 5 Pin 3.3V SSOP

Manufacturer: ROHM Semiconductor
Nocochips NO: 687-BD2206G-TR
Package: SSOP
Datasheet: -
Stock: 896
Description: 3.3V PMIC 5 Pin 3.3V SSOP (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Package / Case	SSOP
Number of Pins	5
Packaging	Tape & Reel (TR)
Published	2006
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	5
Termination	SMD/SMT
ECCN Code	EAR99
Resistance	150mOhm
Max Operating Temperature	85°C
Min Operating Temperature	-25°C
Subcategory	Peripheral Drivers
Max Power Dissipation	675mW
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	3.3V
Pin Count	5
Number of Outputs	1
Output Voltage	3.9V
Max Output Current	500mA
Power Supplies	3.3V
Temperature Grade	OTHER
Interface	On/Off
Max Supply Voltage	3.6V
Min Supply Voltage	2.7V
Nominal Supply Current	70μA
Output Configuration	High Side
Power Dissipation	675mW
Output Current	500mA
Turn On Delay Time	10 ms
Max Output Voltage	6.3V
Max Input Voltage	3.6V
Output Current per Channel	500mA
Nominal Input Voltage	3.6V
Turn-Off Delay Time	200 μs
Driver Number of Bits	1
Fault Protection	Over Temperature
Output Peak Current Limit-Nom	0.75A
Built-in Protections	OVER CURRENT; THERMAL; UNDER VOLTAGE
Length	2.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant

BD2206G-TR Overview

A Tape & Reel (TR) is used to package it.Package SSOP contains it.It is possible to use 1 outputs in the lighting driver.There are 5 terminations in it.The 5 pins are used for the operation of the system.As far as the lighting driver is concerned, there are 1 functions.In order to meet the operation criteria, the maximum output current drops to 500mA.Supply voltages of 3.3V allow for high efficiency.The lighting driver is mounted in the way of Surface Mount.It is equipped with a total of 5 pins.Currently, the LED driving board has a resistance of 150mOhm ohms.When this is the case, the output current is set to 500mA.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.This part has a power supply of 3.3V volts.This LED driving board can accept voltages up to 3.6V volts as an input.A maximum operating temperature of 85°C°C is required to provide stable operation.Ensure reliability by operating at a minimum temperature of -25°C degrees Celsius.It can handle a voltage of 3.6VV as its maximum supply voltage.It is also capable of running at 2.7V volts if necessary.