BD2221G-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 210mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 670mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BD2221 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 350mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | USB Switch |
| Nominal Input Voltage | 5V |
| Turn-Off Delay Time | 3 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.35A |
| Rds On (Typ) | 160m Ω |
| Turn Off Time | 40 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
BD2221G-TR Overview
Tape & Reel (TR) is how it's packaged.It's included in the SC-74A, SOT-753 package.This LED driving board is mounted using the mounting type Surface Mount.USB Switch is the switch type it owns.Ensure reliable operation by setting the temperature to -40°C~85°C TA.There are 1 outputs available on this lighting driver.The LED driving board is powered by a voltage of Not Required.The maximum output voltage is N-Channel volts.It has a total of Slew Rate Controlled, Status Flag features.The BD2221 family consists of this type.As a result, there are 5 terminations.The 5 pins are used for the operation of the system.The LED driving board has a total of 1 functions.The maximum output current is reduced to 500mA to meet the operation criteria.The supply voltage can be 5V for high efficiency.The lighting driver is mounted in the direction of Surface Mount.The LED driver has a total of 5 pins.In this LED driving board, there is 210mOhm resistance.This case has the output current set to 350mA.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.5V is the power supply of the part.Optimal efficiency requires a voltage of 5V.
BD2221G-TR Features
Supplied from 5V
Resistance of 210mOhm
BD2221G-TR Applications
There are a lot of ROHM Semiconductor BD2221G-TR Power Switches ICs applications.
- Hot Swaps
- Notebook and Tablet Computers
- Wireless/Networking Cards
- Portable/Handheld Devices
- USB3.1 Power Delivery
- Set-Top Boxes
- Notebook PC
- Portable GPS Device
- Hot Swap
- USB Power Distribution
