BD2226G-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 200mOhm |
| Max Power Dissipation | 670mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | BD2226 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 750mA |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | USB Switch |
| Nominal Input Voltage | 5V |
| Turn-Off Delay Time | 3 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 150m Ω |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
BD2226G-TR Overview
It is package in Tape & Reel (TR) case.This package is included in SC-74A, SOT-753.The LED driver is mounted as Surface Mount.USB Switch is the switch type it owns.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.The LED driver is equipped with 1 outputs.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.This LED driving board is equipped with Slew Rate Controlled, Status Flag features in order for it to be useful.The BD2226 family consists of this type.It consists of 5 terminations in total.In order to operate, the 5 pins are used.The LED driving board has a total of 1 functions.As a result, the maximum output current is reduced to 750mA in order to meet the operation requirements.With a supply voltage of 5V, high efficiency is possible.The LED driving board is mounted in the way of Surface Mount.In total, it has 5 pins.There is 200mOhm resistance on the LED driver.The output current is set to 500mA in this case.The supply voltage (Vsup) should be kept above 2.7V for normal operation.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.In total, 1 channels are available.In order to achieve the best efficiency, the supply voltage should be set to 5V.
BD2226G-TR Features
Supplied from 5V
Resistance of 200mOhm
1 channels
BD2226G-TR Applications
There are a lot of ROHM Semiconductor BD2226G-TR Power Switches ICs applications.
- Telecom and Network Systems
- Low Voltage I/O System Power
- Gaming
- Smart Phones, Feature Phones
- Wireless/Networking Cards
- Set-Top Boxes
- PDAs
- PC Card Hot Swap
- PC Cards
- Set-top-box
