BD2232G-GTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 145mOhm |
| Max Power Dissipation | 670mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BD2232 |
| JESD-30 Code | R-PDSO-G5 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.15A |
| Operating Supply Voltage | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | USB Switch |
| Nominal Input Voltage | 5V |
| Turn-Off Delay Time | 3 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 100m Ω |
| Turn Off Time | 40 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
BD2232G-GTR Overview
The LED driver's packaged as a Tape & Reel (TR).There is a package for it in the SC-74A, SOT-753 package.In this case, the LED driving board is mounted as Surface Mount.There is a switch type of USB Switch.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.By default, it is set to output 1.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.The lighting driver has Slew Rate Controlled, Status Flag features.There is a BD2232 family of things that it belongs to.A total of 5 terminations can be found in it.It has 1 functions.The maximum output current must drop to 1.15A to meet the operation criteria.Supply voltages of 5V allow for high efficiency.It has 145mOhm resistance.The output current is set to 500mA in this case.A supply voltage of 5V is recommended for maximum efficiency.
BD2232G-GTR Features
Supplied from 5V
Resistance of 145mOhm
BD2232G-GTR Applications
There are a lot of ROHM Semiconductor BD2232G-GTR Power Switches ICs applications.
- Solid-State Drives
- Portable Devices
- Portable Video Game Players
- USB Power Distribution
- Wireless Headsets
- Hot Swap
- USB3.1 Power Delivery
- PC Card Hot Swap
- Smartphone and PDA
- Various applications equipped with buttons
