BD2233G-GTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 145mOhm |
| Max Power Dissipation | 670mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BD2233 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.15A |
| Operating Supply Voltage | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | USB Switch |
| Turn-Off Delay Time | 3 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 100m Ω |
| Turn Off Time | 40 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
BD2233G-GTR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).The SC-74A, SOT-753 package includes it.The mounting type of the LED driver is Surface Mount.There is a USB Switch switch type associated with it.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.By default, it is set to output 1.A supply voltage of Not Required is required for it to operate.The maximum output voltage of this LED driver is N-Channel volts.It has a total of Slew Rate Controlled, Status Flag features.This object belongs to the BD2233 family.It consists of 5 terminations in total.It is necessary to use the 5 pins in order to operate the LED driver.It consists of 1 functions.This results in the maximum output current dropping to 1.15A to meet the operation criteria.Using a voltage of 5V allows for high efficiency.Surface Mount is mounted in the way.145mOhm resistance is present in the lighting driver.In this case, the output current will be set to 500mA.In order to optimize the efficiency of the supply voltage, it should be set to 5V.
BD2233G-GTR Features
Supplied from 5V
Resistance of 145mOhm
BD2233G-GTR Applications
There are a lot of ROHM Semiconductor BD2233G-GTR Power Switches ICs applications.
- Solid State Drivers
- HDD and SSD
- USB Ports/Hubs
- USB Power Distribution
- Hard Disk Drives
- Notebook and Tablet Computers
- Hot Swaps
- Wireless Modem Data Cards
- Portable Devices
- Hot-Swap Systems
