BD2241G-GTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 155mOhm |
| Max Power Dissipation | 670mW |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BD2241 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 820mA |
| Operating Supply Voltage | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 650mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | USB Switch |
| Turn-Off Delay Time | 3 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 110m Ω |
| RoHS Status | ROHS3 Compliant |
BD2241G-GTR Overview
A Tape & Reel (TR) is used to package it.In the SC-74A, SOT-753 package, it is included.In this case, the LED driving board is mounted as Surface Mount.This switch is of type USB Switch.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The lighting driver is equipped with 1 outputs that can be used.With a supply voltage of Not Required, the LED driving board operates.It produces a maximum output voltage of N-Channel volts at its maximum output.This LED driving board is equipped with Slew Rate Controlled, Status Flag features in order for it to be useful.There is a BD2241 family of things that it belongs to.During operation, the 5 pins are used.The maximum output current must drop to 820mA to meet the operation criteria.It is mounted in the way of Surface Mount.In this case, there is 155mOhm resistance in the LED driving board.This case has the output current set to 650mA.The supply voltage should be set at 5V for best efficiency.
BD2241G-GTR Features
Resistance of 155mOhm
BD2241G-GTR Applications
There are a lot of ROHM Semiconductor BD2241G-GTR Power Switches ICs applications.
- Hot Swaps
- Handheld Devices
- HDD and SSD
- Solid-State Drives
- Wearable Devices
- Set-top-box
- Storage (HDDs, SSDs)
- USB Ports/Hubs
- Mobile Communication Devices
- Hot Swap
