BD2248G-GTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 8 |
| Weight | 157.991892mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 72mOhm |
| Max Power Dissipation | 580mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | BD2248 |
| JESD-30 Code | R-PDSO-G5 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 200mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ms |
| Switch Type | USB Switch |
| Turn-Off Delay Time | 20 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 110m Ω |
| Switch-off Time-Max | 40000ns |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD2248G-GTR Overview
It is package in Tape & Reel (TR) case.Package SC-74A, SOT-753 contains it.The LED driver is mounted as Surface Mount.USB Switch is the switch type it owns.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.There is a default setting of 1 for output.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.Status Flag features are available on the lighting driver.It comes under the family of BD2248.It contains 5 terminations.In order to operate, 8 pins are used.The LED driving board has a total of 1 functions.This operation requires the maximum output current to be decreased to 200mA.Supply voltages of 5V allow for high efficiency.Surface Mount is mounted in the way of this LED driving board.Currently, the LED driving board has a resistance of 72mOhm ohms.The maximum supply voltage is set to 5.5V.Normal operation requires Vsup above 2.7V.In this lighting driver, SPST is the analog IC.In total, there are 1 channels available.
BD2248G-GTR Features
Supplied from 5V
Resistance of 72mOhm
1 channels
BD2248G-GTR Applications
There are a lot of ROHM Semiconductor BD2248G-GTR Power Switches ICs applications.
- Smart Phones, Feature Phones
- PC Cards
- Handheld Devices
- Wearable Devices
- Set-Top Boxes
- Portable Video Game Players
- USB Power Distribution
- Wireless/Networking Cards
- Portable GPS Device
- Portable GPS
