BD45302G-TR
| Parameters | |
|---|---|
| Base Part Number | BD45 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 9.5V |
| Min Supply Voltage | 950mV |
| Operating Supply Current | 850nA |
| Power Dissipation | 540mW |
| Max Supply Current | 2.85μA |
| Adjustable Threshold | NO |
| Accuracy | 1 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 180ms Minimum |
| Min Reset Threshold Voltage | 2.97V |
| Max Reset Threshold Voltage | 3.03V |
| Threshold Voltage | +3.0V |
| Reset Delay Time | 200 ms |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD45xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Additional Feature | DETECTION THRESHOLD VOLTAGE IS 3.0V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 540mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
BD45302G-TR Overview
As you can see, this power management is mounted through 5 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. This IC power shares lots of benefits with other Voltage Detector products. IC management conducts at a voltage of 5V. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts IC management. A IC power such as this can be classified as a Power Management Circuits power management system. There are a total of 5 pins on power management. 5 pins make up the power management. It is recommended that Vsup should not be less than 950mV for this IC power. Voltage (Vsup) shouldn't exceed 9.5V volts in this PMIC. Mounting type Surface Mount is recommended. This power management is the recommended temperature range for the supervisors: -40°C~105°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. Supplied with a operating current of 850nA, this PMIC is capable of fully function as specified. Among other features, IC power can be also taken advantage of [0], for instance. It is always advisable to use BD45, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 2.85μA can be used with this power management. Supervisors from the well-known BD45xxx series product line are featured in this PMIC.
BD45302G-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
850nA operating supply current
BD45302G-TR Applications
There are a lot of ROHM Semiconductor BD45302G-TR Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Power distribution systems of ICU
- Personal computers
- Digitally controlled LDO regulators circuit
- Solar power charger
- Transformer load monitoring equipment
- Radar
- Medical-specific insulation monitor
- Military electronics
- Household appliances
