BD45335G-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD45xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 540mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5.3V |
| Base Part Number | BD45 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 9.5V |
| Min Supply Voltage | 950mV |
| Max Supply Current | 3μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.3V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 45ms Minimum |
| Min Reset Threshold Voltage | 3.267V |
| Max Reset Threshold Voltage | 3.333V |
| Threshold Voltage | +3.3V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD45335G-TR Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. In terms of packaging, power management follows the Tape & Reel (TR) model. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes SC-74A, SOT-753 functions. This IC power shares lots of benefits with other Voltage Detector products. There is a voltage supply of 5.3V for the PMIC chip, and the chip conducts at that voltage. Power ics operate at 1 supply voltages. Power management is included in the Surface Mount mount. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 5 pins in it. This power management has 5 pins. A voltage (Vsup) that doesn't fall below 950mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. Voltage (Vsup) shouldn't exceed 9.5V volts in this PMIC. Surface Mount mounting is recommended. You should set the supervisor's temperature during -40°C~105°C TA . As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. For similar manage ics search of the manufacturer, you can always refer to BD45, the base PMIC number. At most, voltage supervisor can operate at a supply temperature of 3μA. Supervisors from the well-known BD45xxx series product line are featured in this PMIC.
BD45335G-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
BD45335G-TR Applications
There are a lot of ROHM Semiconductor BD45335G-TR Voltage Supervisors applications.
- Important electronics for automotive protection
- Leakage protection
- Digitally controlled LDO regulators circuit
- Military communications
- Computer applications
- Kitchen appliances
- Low voltage/high power - AI, GPU
- Detection of phase imbalance
- Utility meter
- External alarm
