BD45371G-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD45xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 540mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5.7V |
| Base Part Number | BD45 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 9.5V |
| Min Supply Voltage | 950mV |
| Max Supply Current | 3μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.7V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 90ms Minimum |
| Min Reset Threshold Voltage | 3.663V |
| Max Reset Threshold Voltage | 3.737V |
| Threshold Voltage | +3.7V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD45371G-TR Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. It is packaged with Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. With power management, you get a lot of benefits that you won't find in other Voltage Detector products. When 5.7V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount is the one that mounts power management. The power management system can be categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 5. The pins of the power management system count 5. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 950mV volts. The supply voltage (Vsup) should not exceed 9.5V volts in this IC power. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~105°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. If you want to search for similar IC managements of this manufacturer, you can always refer to BD45, which is the base power ics number. A maximum supply temperature of 3μA can be used with this power management. As you may know, this PMIC comes from the well-known BD45xxx series product line.
BD45371G-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
BD45371G-TR Applications
There are a lot of ROHM Semiconductor BD45371G-TR Voltage Supervisors applications.
- Detection of phase loss
- Leakage current detection
- Smartphones
- Microcontroller system
- Microprocessor system
- Insulation fault location system
- Detection of phase sequence
- Medical-specific insulation monitor
- Computer applications
- Medical-specific isolation transformer
