BD45425G-TR
| Parameters | |
|---|---|
| Power Dissipation | 540mW |
| Max Supply Current | 3μA |
| Adjustable Threshold | NO |
| Accuracy | 1 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.2V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 45ms Minimum |
| Min Reset Threshold Voltage | 4.158V |
| Max Reset Threshold Voltage | 4.242V |
| Threshold Voltage | +4.2V |
| Reset Delay Time | 50 ms |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD45xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 540mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 6.2V |
| Base Part Number | BD45 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 9.5V |
| Min Supply Voltage | 950mV |
| Operating Supply Current | 850nA |
BD45425G-TR Overview
There are 5 terminals connected to this power management, which makes it easy to mount. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes SC-74A, SOT-753 functions. There are many benefits that this IC power shares with other Voltage Detector products as well. A supply voltage of 6.2V is used to conduct the PMIC chip. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts IC management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. The total number of pins on this power management is 5. Pin count of the power management is 5. A voltage (Vsup) that doesn't fall below 950mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) is not to exceed 9.5V volts in this IC management. The recommended mounting type for IC management is Surface Mount. We recommend setting the supervisors to -40°C~105°C TA degrees. The output voltage of this power managment ic during operation is Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 850nA. A similar IC managements number of the manufacturer can always be found by using BD45, the base power ics number. Voltage supervisor can work with a supply temperature of 3μA at the most. The IC power comes from the well-known BD45xxx series.
BD45425G-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
850nA operating supply current
BD45425G-TR Applications
There are a lot of ROHM Semiconductor BD45425G-TR Voltage Supervisors applications.
- Stable power system
- DSP
- Battery-powered equipment
- Electric heating appliances
- Power distribution systems of ICU
- Power distribution systems of operating room
- Data storage applications
- Precision measurement
- Consumer electronics
- Important electronics for automotive safety
