BD45451G-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | BD45xxx |
| Tolerance | 1% |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 540mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 6.5V |
| Base Part Number | BD45 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Max Output Current | 5mA |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 950mV |
| Operating Supply Current | 850nA |
| Nominal Supply Current | 850nA |
| Max Supply Current | 3.15μA |
| Adjustable Threshold | NO |
| Accuracy | 1 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.5V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 90ms Minimum |
| Min Reset Threshold Voltage | 4.455V |
| Max Reset Threshold Voltage | 4.545V |
| Threshold Voltage | +4.5V |
| Reset Delay Time | 100 ms |
| Length | 2.9mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD45451G-TR Overview
A total of 5 terminals are used to mount this power management. In terms of packaging, power management follows the Tape & Reel (TR) model. Please refer to this PMIC for 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. Compared to other Voltage Detector products, this PMIC has a lot of benefits to offer. Manage ics operate at 6.5V supply voltages. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 5. Pin count of the power management is 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 950mV. There should be no more than 10V volts of maximum supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~105°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The power management's supply current is 850nA. It is always advisable to use BD45, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature is 3.15μA. Located in the well-known BD45xxx series product line, this IC management is a kind of this series. As a result, there is a nominal tolerance of 1% that needs to be noted when measuring and testing this IC management.
BD45451G-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
850nA operating supply current
BD45451G-TR Applications
There are a lot of ROHM Semiconductor BD45451G-TR Voltage Supervisors applications.
- Personal computers
- Stable power system
- Telecommunications equipment
- Household appliances
- Digitally controlled LDO regulators circuit
- Battery-powered equipment
- Radar
- Functional modules
- Automotive power systems
- Power distribution systems of infant care room
