BD45485G-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD45xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 540mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 6.8V |
| Base Part Number | BD45 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 9.5V |
| Min Supply Voltage | 950mV |
| Max Supply Current | 3.15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.8V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 45ms Minimum |
| Min Reset Threshold Voltage | 4.752V |
| Max Reset Threshold Voltage | 4.848V |
| Threshold Voltage | +4.8V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD45485G-TR Overview
Power management is mounted through 5 terminals. Tape & Reel (TR)-packaging is used. In this IC power you will find 1 functions for you to refer to. This power managment ic consists of 1 channels, each of which can be used independently. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. Compared to other Voltage Detector products, this PMIC has a lot of benefits to offer. When 6.8V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 5 pins on power management. 5 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 950mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 9.5V volts. A Surface Mount mounting type is recommended. This range of temperature should be set for the supervisors: -40°C~105°C TA. During operation, this power management system outputs Open Drain or Open Collector. If you want to search for similar IC managements of this manufacturer, you can always refer to BD45, which is the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 3.15μA. The PMIC is a kind of the well-known BD45xxx series of products.
BD45485G-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
BD45485G-TR Applications
There are a lot of ROHM Semiconductor BD45485G-TR Voltage Supervisors applications.
- Smartphones
- Set top box
- Refrigeration
- External alarm
- Magnetic resonance imaging
- Automotive power systems
- Household appliances
- Automotive permanent magnet synchronous motors
- Important electronics for automotive protection
- Military communications
