BD46275G-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD46xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 540mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 4.7V |
| Base Part Number | BD46 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 950mV |
| Operating Supply Current | 850nA |
| Max Supply Current | 2.85μA |
| Adjustable Threshold | NO |
| Accuracy | 1 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.7V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 45ms Minimum |
| Min Reset Threshold Voltage | 2.673V |
| Max Reset Threshold Voltage | 2.727V |
| Threshold Voltage | +2.7V |
| Reset Delay Time | 50 ms |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD46275G-TR Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. There is a Tape & Reel (TR)-packaging method applied to IC management. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. There are a lot of similarities between this IC management and other Voltage Detector products. There is a voltage supply of 4.7V for the PMIC chip, and the chip conducts at that voltage. IC management conducts in a 1-voltage supply. The mount is provided by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 5 pins on power management. Pin count of the power management is 5. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 950mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~105°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 850nA. It is always advisable to use BD46, the base supervisor number, when searching for similar PMICs from the manufacturer. At most, voltage supervisor can operate at a supply temperature of 2.85μA. The IC power that you are looking at comes from our well-known BD46xxx series product line.
BD46275G-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
850nA operating supply current
BD46275G-TR Applications
There are a lot of ROHM Semiconductor BD46275G-TR Voltage Supervisors applications.
- Detection of phase sequence
- FPGA design
- Important electronics for automotive safety
- DC stabilized power supply module
- Linux and server computing
- Military electronics
- Battery cars
- Leakage protection
- DSP
- WiFi router
