BD46291G-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD46xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 540mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 4.9V |
| Base Part Number | BD46 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 9.5V |
| Min Supply Voltage | 950mV |
| Max Supply Current | 2.85μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.9V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 90ms Minimum |
| Min Reset Threshold Voltage | 2.871V |
| Max Reset Threshold Voltage | 2.929V |
| Threshold Voltage | +2.9V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD46291G-TR Overview
There are 5 terminals on this power management that allow it to be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. A series of 1 channels can be found on this supervisor. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are a lot of similarities between this IC management and other Voltage Detector products. When a supply voltage of 4.9V is applied to the power ic, it conducts. IC management conducts in a 1-voltage supply. Using Surface Mount, IC management is mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 5 pins in it. Pin count of the power management is 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 950mV, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 9.5V volts. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~105°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. If you want to search for similar IC managements of this manufacturer, you can always refer to BD46, which is the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 2.85μA. As you can see, this IC power comes from the well-known BD46xxx series of products.
BD46291G-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
BD46291G-TR Applications
There are a lot of ROHM Semiconductor BD46291G-TR Voltage Supervisors applications.
- Cloud computing
- Solar power charger
- Stable power system
- Detection of phase imbalance
- Computer applications
- Radio
- Detection of phase loss
- Electric heating appliances
- Power distribution systems of CCU
- Insulation fault location system
