BD46302G-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | BD46xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Additional Feature | DETECTION THRESHOLD VOLTAGE IS 3.0V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 540mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | BD46 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 950mV |
| Operating Supply Current | 850nA |
| Nominal Supply Current | 850nA |
| Max Supply Current | 2.85μA |
| Adjustable Threshold | NO |
| Accuracy | 1 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 180ms Minimum |
| Min Reset Threshold Voltage | 2.97V |
| Max Reset Threshold Voltage | 3.03V |
| Threshold Voltage | +3.0V |
| Reset Delay Time | 200 ms |
| Length | 2.9mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD46302G-TR Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. This power ic is packaged in a way that looks like a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. This power management is made up of 1 channels which are available in a series format. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. Compared to other Voltage Detector products, this PMIC has a lot of benefits to offer. IC management conducts at a voltage of 5V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 5 pins on power management. There are 5 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 950mV. There should be no more than 10V volts of supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This power management is the recommended temperature range for the supervisors: -40°C~105°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. Supplied with a operating current of 850nA, this PMIC is capable of fully function as specified. In addition, IC management are other features such as [0], to mention only a few. You can always use BD46, the base supervisor number, to search for similar PMICs of the manufacturer. At the most, voltage supervisor can work with a supply temperature of 2.85μA. As you can see, this IC power comes from the well-known BD46xxx series of products.
BD46302G-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
850nA operating supply current
BD46302G-TR Applications
There are a lot of ROHM Semiconductor BD46302G-TR Voltage Supervisors applications.
- Analog circuit
- Battery-powered equipment
- Set top box
- Network equipment
- Functional modules
- DSP
- Electronics installed in the vehicle
- Refrigeration
- Dash board
- Low voltage/high power - AI, GPU
