banner_page

BD46372G-TR

5.7V5 Terminals 5-Pin BD46 Voltage supervisorBD46xxx Series 1 Channels Min 950mV Max 9.5V


  • Manufacturer: ROHM Semiconductor
  • Nocochips NO: 687-BD46372G-TR
  • Package: SC-74A, SOT-753
  • Datasheet: PDF
  • Stock: 111
  • Description: 5.7V5 Terminals 5-Pin BD46 Voltage supervisorBD46xxx Series 1 Channels Min 950mV Max 9.5V (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Number of Pins 5
Operating Temperature -40°C~105°C TA
Packaging Tape & Reel (TR)
Published 2005
Series BD46xxx
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Type Voltage Detector
Subcategory Power Management Circuits
Max Power Dissipation 540mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 5.7V
Base Part Number BD46
Output Push-Pull, Totem Pole
Pin Count 5
Number of Channels 1
Max Supply Voltage 9.5V
Min Supply Voltage 950mV
Max Supply Current 3μA
Adjustable Threshold NO
Watchdog Timer No
Reset Active Low
Voltage - Threshold 3.7V
Number of Voltages Monitored 1
Reset Timeout 180ms Minimum
Min Reset Threshold Voltage 3.663V
Max Reset Threshold Voltage 3.737V
Threshold Voltage +3.7V
Length 2.9mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week

BD46372G-TR Overview


As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Packaging is in the form of a Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. There are a number of benefits that this PMIC has in common with other Voltage Detector manage ics. The supervisor is always powered by a 5.7V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 5. This power management has 5 pins. A voltage (Vsup) that doesn't fall below 950mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. During this IC power, the maximum supply voltage (Vsup) should not exceed 9.5V volts. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~105°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. For similar manage ics search of the manufacturer, you can always refer to BD46, the base PMIC number. At the most, voltage supervisor can work with a supply temperature of 3μA. As you may know, this PMIC comes from the well-known BD46xxx series product line.

BD46372G-TR Features


Voltage Detector type
Minimum supply voltage of 950mV

BD46372G-TR Applications


There are a lot of ROHM Semiconductor BD46372G-TR Voltage Supervisors applications.

  • Linux and server computing
  • Automotive power systems
  • Important electronics for automotive protection
  • Radio
  • Electrical fire monitoring system
  • Transformer load monitoring equipment
  • Electric heating appliances
  • Smart meter
  • Low voltage/high power - AI, GPU
  • Leakage protection

Write a review

Note: HTML is not translated!
    Bad           Good