BD46471G-TR
| Parameters | |
|---|---|
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 9.5V |
| Min Supply Voltage | 950mV |
| Max Supply Current | 3.15μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.7V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 90ms Minimum |
| Min Reset Threshold Voltage | 4.653V |
| Max Reset Threshold Voltage | 4.747V |
| Threshold Voltage | +4.7V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD46xxx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 540mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 6.7V |
| Base Part Number | BD46 |
BD46471G-TR Overview
Power management is mounted through 5 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. There are many benefits that this IC power shares with other Voltage Detector products as well. When a supply voltage of 6.7V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts IC management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 5. This power management system has 5 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 950mV. This IC power should be powered by no more than 9.5V volts of supply voltage (Vsup). A Surface Mount mounting type is recommended. This power management is the recommended temperature range for the supervisors: -40°C~105°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. For similar manage ics search of the manufacturer, you can always refer to BD46, the base PMIC number. At the most, voltage supervisor can work with a supply temperature of 3.15μA. The IC power comes from the well-known BD46xxx series.
BD46471G-TR Features
Voltage Detector type
Minimum supply voltage of 950mV
BD46471G-TR Applications
There are a lot of ROHM Semiconductor BD46471G-TR Voltage Supervisors applications.
- Stable power system
- Efficient information transmission
- WiFi router
- Personal computers
- Magnetic resonance imaging
- Consumer electronics
- Leakage current detection
- Low voltage/high power - AI, GPU
- Kitchen appliances
- Military electronics
