BD4719G-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~75°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD47xx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 540mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 1.812V |
| Base Part Number | BD47 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Output Type | TTL |
| Max Output Current | 15mA |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | -300mV |
| Operating Supply Current | 1.6μA |
| Nominal Supply Current | 1.6μA |
| Max Supply Current | 3μA |
| Adjustable Threshold | NO |
| Accuracy | 1 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.9V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 1.881V |
| Max Reset Threshold Voltage | 1.919V |
| Threshold Voltage | +1.9V |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD4719G-TR Overview
As you can see, this power management is mounted through 5 terminals. Power management is packaged in a Tape & Reel (TR) way. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Voltage Detector products. IC management conducts in a 1.812V-voltage supply. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 5 pins on IC management. This power management system has 5 pins. IC management can only work with a supply voltage of -300mV volts. Voltage (Vsup) shouldn't exceed 10V volts in this PMIC. The recommended mounting type is Surface Mount. We recommend setting the supervisors to -40°C~75°C TA degrees. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. In order to maintain a stable supply current for the power management, 1.6μA is the recommended value. You can always use BD47, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature voltage supervisor can handle is 3μA. Located in the well-known BD47xx series product line, this IC management is a kind of this series.
BD4719G-TR Features
Voltage Detector type
Minimum supply voltage of -300mV
1.6μA operating supply current
BD4719G-TR Applications
There are a lot of ROHM Semiconductor BD4719G-TR Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Leakage current detection
- Detection of phase sequence
- Unattended substation automation
- Electronics installed in the vehicle
- Fire equipment power monitoring system
- Electrical fire monitoring system
- Multi-voltage system
- External alarm
- Precision measurement
