BD4721G-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~75°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD47xx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 540mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 2.008V |
| Base Part Number | BD47 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 650mV |
| Operating Supply Current | 1.6μA |
| Nominal Supply Current | 1.6μA |
| Max Supply Current | 3μA |
| Adjustable Threshold | NO |
| Accuracy | 1 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.1V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 2.079V |
| Max Reset Threshold Voltage | 2.121V |
| Threshold Voltage | +2.1V |
| Length | 2.9mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD4721G-TR Overview
This power management consists of 5 mounting terminals on which it can be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 1 channels that can be found. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Voltage Detector products. Manage ics operate at 2.008V supply voltages. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 5 pins in it. Power managment ic pin count is 5. IC management can only work with a supply voltage of 650mV volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The temperature of the supervisors should be set to this range: -40°C~75°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 1.6μA is the recommended value. If you want to search for similar IC managements of this manufacturer, you can always refer to BD47, which is the base power ics number. At most, voltage supervisor can operate at a supply temperature of 3μA. Supervisors from the well-known BD47xx series product line are featured in this PMIC.
BD4721G-TR Features
Voltage Detector type
Minimum supply voltage of 650mV
1.6μA operating supply current
BD4721G-TR Applications
There are a lot of ROHM Semiconductor BD4721G-TR Voltage Supervisors applications.
- Solar power charger
- Detection of phase sequence
- Rechargeable batteries
- DVR
- Consumer electronics
- DSP
- Automotive permanent magnet synchronous motors
- Low voltage/high power - AI, GPU
- Microprocessor system
- Radar
