BD4723G-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~75°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | BD47xx |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Voltage Detector |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 540mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 2.204V |
| Base Part Number | BD47 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 650mV |
| Nominal Supply Current | 1.6μA |
| Max Supply Current | 3μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.3V |
| Number of Voltages Monitored | 1 |
| Min Reset Threshold Voltage | 2.277V |
| Max Reset Threshold Voltage | 2.323V |
| Threshold Voltage | +2.3V |
| Length | 2.9mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD4723G-TR Overview
As you can see, this power management is mounted through 5 terminals. A Tape & Reel (TR) package is used to package the power management. For your reference, this IC power includes a list of 1 functions. On this supervisor, there is a series of 1 channels that can be found. IC management is packaged as a SC-74A, SOT-753 package. Several of the benefits of this PMIC are also shared by other Voltage Detector products. IC management conducts in a 2.204V-voltage supply. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. Power Management Circuits is a subcategory of this PMIC chip. There are a total of 5 pins on power management. Power managment ic pin count is 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 650mV. During this IC power, the maximum supply voltage (Vsup) should not exceed 10V volts. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~75°C TA. Power management has an output of Open Drain or Open Collector during operation. It is always advisable to use BD47, the base supervisor number, when searching for similar PMICs from the manufacturer. Voltage supervisor can work with a supply temperature of 3μA at the most. The IC power that you are looking at comes from our well-known BD47xx series product line.
BD4723G-TR Features
Voltage Detector type
Minimum supply voltage of 650mV
BD4723G-TR Applications
There are a lot of ROHM Semiconductor BD4723G-TR Voltage Supervisors applications.
- Electrical fire monitoring system
- Household appliances
- Urban rail transit weak current power monitoring
- DSP
- Magnetic resonance imaging
- Low voltage/high power - AI, GPU
- Power distribution systems of CCU
- Power distribution systems of infant care room
- Electric heating appliances
- Microprocessor system
