banner_page

BD4731G-TR

2.988V5 Terminals 5-Pin BD47 Voltage supervisorBD47xx Series 1 Channels Min 650mV Max 10V


  • Manufacturer: ROHM Semiconductor
  • Nocochips NO: 687-BD4731G-TR
  • Package: SC-74A, SOT-753
  • Datasheet: PDF
  • Stock: 190
  • Description: 2.988V5 Terminals 5-Pin BD47 Voltage supervisorBD47xx Series 1 Channels Min 650mV Max 10V (Kg)

Details

Tags

Parameters
Number of Channels 1
Max Supply Voltage 10V
Min Supply Voltage 650mV
Nominal Supply Current 1.6μA
Max Supply Current 3μA
Adjustable Threshold NO
Watchdog Timer No
Reset Active Low
Voltage - Threshold 3.1V
Number of Voltages Monitored 1
Min Reset Threshold Voltage 3.069V
Max Reset Threshold Voltage 3.131V
Threshold Voltage +3.1V
Length 2.9mm
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Number of Pins 5
Operating Temperature -40°C~75°C TA
Packaging Tape & Reel (TR)
Published 2005
Series BD47xx
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Type Voltage Detector
Subcategory Power Management Circuits
Max Power Dissipation 540mW
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 2.988V
Base Part Number BD47
Output Open Drain or Open Collector
Pin Count 5

BD4731G-TR Overview


There are 5 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. With power management, you get a lot of benefits that you won't find in other Voltage Detector products. A supply voltage of 2.988V is used to conduct the PMIC chip. Power ics operate at 1 supply voltages. Surface Mount mounts power management on the wall. The power management belongs to the Power Management Circuits subcategory. 5 pins are present in total in this power management. The pins of the power management system count 5. A voltage (Vsup) that doesn't fall below 650mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. During this IC power, the maximum supply voltage (Vsup) should not exceed 10V volts. The mounting type of the supervisors is Surface MountThe supervisors should be set to the following temperature: -40°C~75°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. You can always use BD47, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 3μA can be used. The IC power that you are looking at comes from our well-known BD47xx series product line.

BD4731G-TR Features


Voltage Detector type
Minimum supply voltage of 650mV

BD4731G-TR Applications


There are a lot of ROHM Semiconductor BD4731G-TR Voltage Supervisors applications.

  • Leakage protection
  • Power distribution systems of operating room
  • Smartphones
  • Sensitive sensors
  • Solar power charger
  • Detection of phase loss
  • Transformer load monitoring equipment
  • Power distribution systems of ICU
  • Automotive power systems
  • WiFi router

Write a review

Note: HTML is not translated!
    Bad           Good